Linear Motor Drive
Die-sinker EDM includes SP Power Supply
＜Examples of Machining＞ TPC-4
〇Electrode (CuW) ：φ15 ㎜×3
〇Electrode Wear ：0.04 ㎜/side
〇Workpiece Material ：Cemented Carbide
〇Lower Hole Flushing ：0.1MPa
〇Machining Depth ：7.5 ㎜
〇Pilot Hole ：φ7.5 ㎜
〇Surface Roughness ：Rz 3.8μm
★Total Machining Time：1h 52m 41s
Reduced by 28% compared to a conventional ※
★Electrode Wear ：Roughing 1.43mm / Semi-Finishing 0.22mm /Finishing 0.04mm